Door frames
«Papa Carlo» door factory
COMPLANAR frame
Doors from the Millenium and Plato collections can be fitted with this type of frame. The design of the frame means that the casing mounted on the front side will be flush with the door leaf. The frame is 80 mm wide with a groove for an extender. A seal is fitted around the perimeter of the frame. The mounting elements used to install the door block must be hidden under the seal.
COMPLANAR frame (INSIDE)
Doors from the Plato and Style collections can be fitted with this type of frame. The special feature of the COMPLANAR INSIDE frame is that the casing is a separate element and is fitted during installation, after the frame itself has been mounted, similarly to the complanar frame with direct opening. The frame is fixed to the wall in the same way as the aluminium frames of the same design: either at the hardware recess points (the holes for the hinges and the lock's strike plate) or by means of mounting plates.
Aluminium frame for direct opening
Doors from the Idoors and Plato collections can be fitted with this type of frame. It is used when an interior solution is needed in which the doors should not stand out from the wall. It is installed without casings. The wall finishes are brought up to the frame. Installation is carried out in two stages. First, before renovation work begins, the frame is mounted, and after the renovation is complete the door leaf is fitted into it.
Aluminium frame for reversible opening
Doors from the Idoors collections can be fitted with this type of frame. It is used when an interior solution is needed in which the doors should not stand out from the wall. It is installed without casings. The wall finishes are brought up to the frame. Installation is carried out in two stages. First, before renovation work begins, the frame is mounted, and after the renovation is complete the door leaf is fitted into it.